Quality, Australian Made Kerbmarkers, Tags & Plates since 1998.

High quality stainless steel & brass kerb markers,
ID tags & plates for civil & utility companies.

Shipping costs are determined by weight and according to your location.
You will be advised of these costs once we have received your request.

Vic Water – SCV W

Choose Quantity:
SKU: IDT-003 Categories: ,

Installation Procedures

Simply drill a 5mm hole into the base material to a depth deeper than the embedment required.

Using a hammer or mallet drive the anchor through the fixture into the another hole the until the head is fimly seated against the fixture.

Be sure the anchor is drive to the required embedment depth.

Mushroom head and stainless steel spike

The Mushroom head and stainless steel spike’s are designed to be a simple and robust means of fixing tags in place. The spike is formed with an ‘s’ shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring-type compression force against the walls of the hole.

Use of the spike anchor reduces installation time, since the anchor is pre-expanded, and there is no secondary lighting operation required. This greatly reduces the overall cost of an anchor installation. The simple, installation procedure helps to insure a quality application each time the spike anchor is used

Fixed Legs & Single Spike Tags

All fixed leg tags and single spike markers are designed to simply be pushed into wet concrete.


scour valve.All s/s plates & tags come with 5x50mm stainless steel mushroom head fixing spikes. All tags are 38mm dia x 1.6mm thickness unless otherwise stated.