The available identification tag and kerb markers are 38mm in diameter and 1.6mm thick. Our tags are made from High Quality Stainless Steel and each comes with a 50mm x 5mm anchor to securely fix the markers to the desired surface. The anchor has an 'S' shaped configuration at the end; this design allows for quick and easy installation of each and every marker. A 5mm hole is all that is needed to be drilled into the base material, to a depth greater than the embedment required. Use a hammer or mallet to drive the anchor through the marker into the anchor hole until the head is firmly seated against the fixture.
Identification and Kerb markers can be ordered in any amount and in any combination of the variety below. If custom markers are needed, please don't hesitate to contact us.
We have supplied multiple Australian Councils, Government Departments and Australian Utility companies with identification tags for their services.
Identification and Kerb markers can be ordered in any amount and in any combination of the variety below. If custom markers are needed, please don't hesitate to contact us.
We have supplied multiple Australian Councils, Government Departments and Australian Utility companies with identification tags for their services.
Identification Tags For:
- Telecommunication Lines
- Sewerage, Gas & Electrical Services
- Water, Side Drains
- Storm Water Drainage
- Non Potable Water
- Under Road Crossings
- Driveway Crossings
- Parks & Garden Paths
- Roads, Golf Courses
- Council & Industrial Purposes
ID Tags are 38mm diam x 1.6mm thick
Tags and spikes are made of high quality stainless steel
Tags and spikes are made of high quality stainless steel
Installation Procudures
Simple drill a 5mm hole into the base material to a depth deeper than the embedment required.
Using a hammer or mallet drive the anchor through the fixture into the anchor hole until the head is firmly seated against the fixture.
Be sure the anchor is driven to the required embedment depth.
Simple drill a 5mm hole into the base material to a depth deeper than the embedment required.
Using a hammer or mallet drive the anchor through the fixture into the anchor hole until the head is firmly seated against the fixture.
Be sure the anchor is driven to the required embedment depth.
Mushroom head and stainless steel spike
The Mushroom Head Stainless Steel Spike's are designed to be a simple and robust means of fixing tags in place. The spike is formed with an 's' shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring type compression force against the walls of the hole.
Use of the spike anchor reduces installation time, since the anchor is pre-expanded, and there is no seconday tightening operation required. This greatly reduces the overall cost of an anchor installation. The simple installation procedure helps to insure a quality application each time the spike anchor is use.
The Mushroom Head Stainless Steel Spike's are designed to be a simple and robust means of fixing tags in place. The spike is formed with an 's' shaped configuration at the working end of the anchor to create an expansion mechanism. The pre-expanded mechanism is activated as the anchor is driven into the drilled hole and creates a spring type compression force against the walls of the hole.
Use of the spike anchor reduces installation time, since the anchor is pre-expanded, and there is no seconday tightening operation required. This greatly reduces the overall cost of an anchor installation. The simple installation procedure helps to insure a quality application each time the spike anchor is use.
Side view of spike used :
Site Map
© 2010 Kerbmakers
Fixed Anchors to put in wet concrete.
Available on request.
Available on request.